Initial Setting - Mitsubishi QD60P8-G User Manual

6 UTILITY PACKAGE (GX Configurator-CT)

6.4 Initial Setting

• Comparison output selection
• Comparison output setting value
• Movement averaging processing selection
• Number of movement averaging processing
• Pre-scale function selection
• Pre-scale setting value
• Alarm output selection
6 - 12
[Purpose]
Make initial setting for operating the QD60P8-G for each channel.
There are the following setting items as the initial setting data (buffer memory).
This initial setting makes sequence program setting unnecessary.
For more information on the setting details, refer to Section 3.4.2.
[Operating procedure]
"Start I/O No.*"
* Enter the start I/O No. in hexadecimal.
[Setting screen]
• Alarm output setting value upper/upper limit
• Alarm output setting value upper/lower limit
• Alarm output setting value lower/upper limit
• Alarm output setting value lower/lower limit
• Count cycle change function selection
• Count cycle setting value
"Module type" "Module model name"
Move to sub window
CH1 Initial Setting
MELSEC-Q
Initial setting
6 - 12