Accessories and Kits
Wiper Kits
See manual 309196 for installation and repair instruc-
tions.
Part No.
Description
253291
Hose/Spring Wiper Kit
253290
Hose and T-Wiper Kit
253289
Twin Hose Wiper Kit
253292
T-Wiper Kit
Applicators and Dispense
Valves
Part No.
Description
249515
Manual Gun, Top Feed, 240V
249514
Manual Gun, Bottom Feed, 240V
249513
Manual Gun, Top Feed, Electric Switch,
240V
249512
Manual Gun, Bottom Feed, Electric Switch,
240V
Air-Operated Heated Dispense
Valves
Part No.
Description
243694
Automatic Dispense Valve, 240V,
Air-Operated Heated Dispense Valve
244951
Automatic Endure Dispense Valve, 240V,
Air-Operated High Flow Heated Dispense
Valve
244909
Automatic Endure Dispense Valve, 240V,
Air-Operated Snuff-Back Heated Dispense
Valve
243701
45 in (114 cm) Distribution Header With
Valve, 240V
334130L
CGM Installation Kit, 25C994
This kit enables controlling logic, such as a robot con-
troller or PLC continuously monitoring data from the
Therm-O-Flow system, as well as optionally controlling
the system accordingly. Refer to manual 3A5186 for
details on the interface. When ordering this kit, select
and order the correct communication gateway module
(CGM) that matches the field bus being used. The fol-
lowing CGM modules are available for the
Therm-O-Flow system.
Part No.
Description
CGMEP0 EitherNet/IP
CGMDN0 DeviceNet
CGMPB0 ProfiBus
CGMPN0 ProfiNet
Flow Control and Manifolds
Part No.
Description
243700
Heated Air Operated Mastic Pressure
Regulator, 240V
243656
23:1 Heated Pressure Compensator Valve,
240V
243657
51:1 Heated Pressure Compensator Valve,
240V
243697
Heated Distribution Manifold, 240V
Includes (2) 3/4 npt(f) inlet check valves, (1)
npt 4–ported manifold, (2) 1 in npt(f) outlet
gate valves, mounting bracket, 400w 230
VAC heaters, RTD sensor, and 8 pin
connector box.
289208
Compact Heated Regulator
Accessories and Kits
89