Setup
Connect Multiple Devices
If your application requires multiple fluid control devices:
•
Connect heated hose electrical connections to the
electrical enclosure. Remove from shipping box to
connect heated hoses to the electrical enclosure.
For additional cables, heated hose, and fluid control
devices, see Accessories and Kits, page 89.
F
. 11
IG
18
•
Connect fluid control devices to a heated hose or
the electrical enclosure. Use accessories if neces-
sary.
•
Setup all heat zones on Heat-A and Heat-B
screens.
Example: Heated zones used to connect a primary and
secondary system to a manifold and two guns. A-#
zones are on the Heat-A screen and B-# zones are on
the Heat-B screen.
334130L