Kits And Accessories; Module Replacement; Cordsets; Heater Cartridges - Graco InvisiPac GM100 Plug-Free Instructions Manual

Kits and Accessories

Module Replacement

25E241
Part Description
--- MODULE
111119 SCREW, valve
24R835 O-RING, fluid (10 pack)
24T179 LUBRICANT, anti-seize
24X834 O-RING, air (10 pack)

Cordsets

Cordsets include the RTD. Use crimp tool kit 24W086
(purchase separately).
Kit Model
25E783 Slim
25E784 Slim
24X760 Standard Dual
24X761 Standard Dual
24W087 All other models Platinum 100 Ohm
24W088 All other models Nickel 120 Ohm

Heater Cartridges

Heater cartridges for single, dual, and quad models.
Kit Model
24X043* Slim
Dual Low Profile
24X242*
and Dual
Quad Low Profile
24X758*
and Quad
* On GSC101 applicators, the insulator gaskets
should be replaced when the heater is replaced.
334627K
Qty.
1
2
1
1
2
RTD Type
Platinum 100 Ohm
Nickel 120 Ohm
Platinum 100 Ohm
Nickel 120 Ohm
Length Qty.
1.75 in. (44 mm) 1
1.75 in. (44 mm) 2
3.1 in. (79 mm) 1

Insulator Gaskets

Part Description
18A386
128220
128219 Quad, Quad 1.5
127943 Dual LP
128007 Quad LP (side)
128008 Quad LP (back)

High Temperature Lubricant

24T156
Packet with 3 grams of high temperature lubricant. For
use on seals in InvisiPac applicators.

Anti-Seize

24T179
Tube with 0.5 oz of anti-seize for use on module
mounting screws in InvisiPac applicators.

Mufflers / Water Trap

24X037
Includes two mufflers that can be used with solenoid
valve kits.
25P581
Includes two water trap assemblies that can be used
with solenoid valve kits to keep water out of exhaust
ports.

Blanking Plate Kit

24W017
Use to run two or three modules on a quad applicator or
one module on a dual applicator.
Kits and Accessories
Slim
Dual
37