Technical Specifications - Graco Therm-O-Flow 200 Instructions - Parts Manual

Technical Specifications

Therm-O-Flow 200 Hot Melt System
Displacement pump effective area
Volume per cycle
Pump cycles per 1 gallon (3.8 liters)
Ram maximum input pressure
Maximum pump operating tempera-
ture
Air inlet size
Air motor sound data
Pump fluid inlet size
Wetted Parts
Maximum Fluid Working Pressure
23:1
36:1
70:1
Maximum Air Input Pressure (Pumps)
23:1
36:1
70:1
Power Requirements
Compressed Air (typical)
Voltage (as selected)
Peak Consumption
(includes drum melt grid, pump, and a 6kVa transformer for the 230 V hoses and accessories)
with standard melt grid
with Mega-Flo melt grid
with smooth melt grid
334130L
U.S.
1.24 in.²
11.7 in.³
100 psi
400°F
See air motor instruction manual.
carbon steel, brass, chrome, zinc, nickel plating, stainless steel (304, 316,
440, and 17–4 PH), alloy steel, ductile iron, PTFE
2300 psi
3000 psi
3000 psi
100 psi
82 psi
43 psi
220/240 V, 3-phase, 50/60 Hz
380/400 V, 3-phase, 50/60 Hz
470/490 V, 3-phase, 50/60 Hz
21
3/4 npsm(f)
1 in. npt(f)
15.9 MPa, 159 bar
20.7 MPa, 207 bar
20.7 MPa, 207 bar
0.57 MPa, 5.7 bar
0.29 MPa, 2.9 bar
25–50 scfm
600 V, 3-phase, 50/60 Hz
27.1 kVa
30.2 kVa
27.1 kVa
Technical Specifications
Metric
8 cm²
192 cm³
0.7 MPA, 7 bar
204°C
0.7 MPa, 7 bar
111