Nordmann AT4 Operating Instructions Manual page 42

5.6.3 Performing remote relay tests
Select the remote test:
Path: Main menu > Diagnostic > Remote Test
AT4 130kg/h 400V3
Standby
2011-08-31 12.00.00
Menu
The list with the remote relay tests appears, the first relay test (steam) is shown.
press the < > and < > keys in order to select the further relay tests available and press the <Set> key
to activate/deactivate the corresponding relay for testing.
5.6.4 Performing Module tests
Note: this function is not available via the optional remote terminal.
Select the Module tests:
Path: Main menu > Diagnostic > Modul-A Test (Modul-B Test)
AT4 130kg/h 400V3
Standby
2011-08-31 12.00.00
Menu
The list with the module tests appears, the first test (Inlet Valve) is shown.
press the < > and < > keys in order to select the further tests of the selected module and press the
<Set> key to activate/deactivate the corresponding component for testing.
42
Main Menu Diagnostic
User :Set ErrorHistory:Set
Engineering :Set Unit Status :Set
Diagnostic :Set Remote Test :Set
Modul-A Test:Set
Modul-B Test:Set
Esc Set Esc
Main Menu Diagnostic
User :Set ErrorHistory:Set
Engineering :Set Unit Status :Set
Diagnostic :Set Remote Test :Set
Modul-A Test:Set
Modul-B Test:Set
Esc Set Esc
Remote Test
Remote Steam
Off
Esc Set
Set
Remote Service
Off
Remote Error
Off
Remote Unit On
Off
Modul-A Test
Inlet Valve
Off
Esc Set
Set
Outlet Pump
Off
Main Contactor
Off
SC-Pump
Off