Configuring The On/Off Timer - Nordmann AT4 Operating Instructions Manual

5.4.7 Configuring the On/Off timer
With the parameters in the "On/Off Timer" submenu you determine whether or not (factory setting) the
Nordmann AT4 is to be switched on and off timer controlled.
– Deactivate On/Off timer:
Select "On/Off Timer" in the settings menu, then press the <Set> key. Let the timer deactivated
(Off) or deactivate the timer if necessary.
Settings
SC-System
Power Limit :Set
On/Off Timer :Set
Water Manag.:Set
Date
Esc
– Activate and configure On/Off timer:
Select "On/Off Timer" in the settings menu, then press the <Set> key. Select "Timer", then press
the <Set> key. In the upcoming modification dialogue activate the timer function and confirm the
setting with the <Set> key.
Settings
SC-System
Power Limit :Set
On/Off Timer :Set
Water Manag.:Set
Date
Esc
If the timer is activated, up to eight switching points (events 1 ­ 8) with different On/Off events can
be defined. Each switching point is defined by a weekday or weekday range, the switching point
and the operating mode.
Configuration notes:
– the settings of an event remain active up to the next event.
– the software does not check the plausibility of the timer settings. Therefore, make sure your
settings make sense.
– the On/Off timer overrides all other timers.
32
On/Off Timer
:Set Timer :Off
:11-08-31
Set Esc
On/Off Timer
:Set Timer :Off
:11-08-31
Set Esc
On/Off Timer
Timer :On
Event 1 :06:00
Event 2 :18:00
Event 3 :--:--
Event 4 :--:--
Esc
On/Off Timer
Timer :On
Event 1 :06:00
Event 2 :18:00
Event 3 :--:--
Event 4 :--:--
Esc
Timer
Off
Off
On
Set Esc Set
Timer
On
Off
On
Set Esc Set
Set
Event 2
Weekday :Mo-Fr
Time :18:00
Mode :Off
Set Esc Set
Event 2
Weekday :Mo-Fr
Time :18:00
Mode :Off
Esc Set
Event 2
Weekday :Mo-Fr
Time :18:00
Mode :Off
Esc Set
Weekday
Mo-Fr
Off
Mo-Fr
Mo-Sa
Mo-Su
Esc Set
Time
18:00
18:00
Esc Set
Mode
On
Off
On
Esc Set