Setting The Operation Time Of The Sc-Pump; Configuring The Capacity Limitation - Nordmann AT4 Operating Instructions Manual

5.4.5.2

Setting the operation time of the SC-Pump

Select "On-Time" in the SC­System settings menu, then press the <Set> key.
Settings
Controls :Set
Cylinder :6564
SC-System :Set
Power Limit :Set
On/Off Timer :Set
Esc
In the upcoming modification dialogue set the operating time of the SC­Pump per hour in minutes.
Factory setting:
Setting range:
5.4.6 Configuring the capacity limitation
With the parameters in the "Power Limit" submenu you determine whether the Nordmann AT4 is to be
operated with a fix capacity limitation (factory setting) or whether it is to be operated with a timer con­
trolled capacity limitation.
– Operation with fix capacity limitation:
Select "Power Limit" in the settings menu, then press the <Set> key. Let the timer deactivated (Off)
or deactivate the timer if necessary.
Settings
Cylinder
SC-System
Power Limit :Set
On/Off Timer :Set
Water Manag.:Set
Esc
Select "Power Limit", then press the <Set> key. In the upcoming modification dialogue set the value
for the fix capacity limitation in % of the maximum capacity.
Factory setting:
Setting range:
30
SC-System
SC-Pumpe :On
On-Time :20min
Set Esc Set
20 minutes
20 ... 60 minutes
Power Limit
:6564 Timer :Off
:Set Power Limit :100%
Set Esc
Power Limit
Timer :Off
Power Limit :100%
Esc
100 %
30...100 %
On-Time
20 min
20 min
Esc Set
Set
Power Limit
100 %
100 %
Set Esc Set