Selecting The Cylinder Type; Configuring The Sc System; Activating/Deactivating The Sc System - Nordmann AT4 Operating Instructions Manual

5.4.4

Selecting the cylinder type

Note: this function is not available via the optional remote terminal.
Select "Cylinder" in the settings menu, then press the <Set> key.
Settings
Language :English
Controls :Set
Cylinder :6564
SC-System :Set
Power Limit :Set
Esc
In the upcoming modification dialogue select the steam cylinder type installed in the unit (see type plate
on the steam cylinder).
Factory setting:
Options:
5.4.5 Configuring the SC system
Select "SC-System" in the settings menu, then press the <Set> key.
Settings
Controls :Set
Cylinder :6564
SC-System :Set
Power Limit :Set
On/Off Timer :Set
Esc
The settings parameter for the lime management system appear. Detailed information on the different
settings are found in the following chapters.
5.4.5.1

Activating/deactivating the SC system

Select "SC-Pump" in the SC system settings menu, then press the <Set> key.
Settings
Controls :Set
Cylinder :6564
SC-System :Set
Power Limit :Set
On/Off Timer :Set
Esc
In the upcoming modification dialogue activate or deactivate the SC system.
Factory setting:
Options:
Cylinder
6564
3262
3264
4564
6564
Set Esc Set
according to the installed cylinder
522, 524, 532, 534, 822, 824, 832, 834, 1532, 1534, 2362, 2364, 3262, 3264,
4564, 6564
SC-System
SC-Pump :On
On-Time :20min
Set Esc Set
SC-System
SC-Pump :On
On-Time :20min
Set Esc Set
Off
On, Off
SC-Pump
On
Off
On
Esc Set
29