Table of Contents
Advertisement
Trip time
The instrument panel calculates and displays the trip
time as "hhh:mm" followed by TRIP TIME.
The calculation is made considering the time travelled
since the last TRIP A reset. When TRIP A is reset, the
value is set to zero.
The time count active phase occurs when the engine
is running and the motorcycle is stopped (the time is
automatically stopped when the motorcycle is not
moving and the engine is OFF and restarts when the
counting active phase starts again).
When the reading exceeds "720:00" (720 hours and
00 minutes), the meter is reset and automatically
starts counting from 0 again.
Note
If you change the unit of measurement for an
item connected to Speed (and distance) or
Consumption, the trip time value will be automatically
reset.
Fig. 29
77
Advertisement
Table of Contents
