Front fork adjustment
The front fork used on this motorcycle has rebound
(return), compression and spring preload adjustment.
Adjustment is done by external adjusters:
-
for rebound adjustment, turn adjuster (2) on RH
fork leg;
-
for compression adjustment, turn adjuster (1) on
LH fork leg.
-
for internal spring preload adjustment, work
17mm (0.67 in) hexagonal adjuster on both fork
legs (3 and 4);
Put the motorcycle on the side stand and make sure it
is stable to set the adjusters.
Turn adjuster (1) at the top end of the LH fork leg with
a 3 mm (0.12 in) Allen wrench to adjust compression.
Turn adjuster (2) at the top end of the RH fork leg with
a 3 mm (0.12 in) Allen wrench to adjust rebound.
188
1
-
+
2
-
+
Fig. 110