Setting the units of measurement: Reset to
automatic settings
This function allows you to restore the automatic
settings for the units of measurement of all
indications displayed on the instrument panel.
To gain access to this function enter the SETTING
MENU, use buttons (1) and (2) to select UNT and
press button (4). Select DEFAULT option, by pressing
4
button (1) or (2).
Once DEFAULT function (D) is highlighted, press
CONFIRM MENU button (4) for 2 seconds. After 2
seconds the display shows the message "DEFAULT"
and its box steady ON for 2 seconds. Then EXIT is
automatically highlighted.
To exit the menu and go back to previous page, select
EXIT and press button (4).
4
4
Fig. 81
156