Trip Time (Trip Time) - Ducati Diavel 1260 Owner's Manual

Trip time (TRIP TIME)

The instrument panel calculates and displays the trip
time as hhh:mm followed by TRIP TIME. The
calculation considers the time since TRIP1 was last
reset. When TRIP1 is reset, this value is reset as well.
The time count active phase occurs when the engine
is running and the motorcycle is stopped (the time is
automatically stopped when the motorcycle is not
moving and the engine is OFF and restarts when the
counting active phase starts again).
When the reading exceeds 511:00 (511 hours and 00
minutes), the meter is reset and automatically starts
counting from 0 again.
If you change the unit of measurement for an item
connected to Speed (and distance) or Consumption
or after a Battery-OFF, the trip time value will be
automatically reset.
Note
If you change the unit of measurement for an
item connected to Speed (and distance) or
Consumption or after a Battery-OFF, the trip time
value will be automatically reset.
185