Table of Contents
Advertisement
Trip time (TRIP TIME 1)
The instrument panel calculates and shows trip time.
Value is displayed as hhh:mm followed by "TRIP
TIME 1" indication.
The calculation is made considering the time elapsed
since the last reset of Trip time (TRIP 1, page 105),
average fuel consumption (CONS.AVG 1, page 103)
and average speed (SPEED AVG 1, page 107). When
TRIP 1 is reset, this value is reset as well.
The active time counting phase occurs when the
engine is running, even when the vehicle is stopped.
The time count is automatically stopped when the
vehicle is not moving and the engine is off and
restarts when the counting active phase starts again.
When the reading exceeds 511:00 (511 hours and 00
minutes), the meter is reset and automatically starts
counting from 0 again.
If button (4) is pressed when trip time is displayed, the
instrument panel will activate the warning "RESET ?"
in place of the time. When this warning is active,
Menu scrolling is not possible.
If you press button (1) or (2), the instrument panel will
display TRIP TIME 1 again, without resetting the
value.
106
56.5
TRIP 1
TRIP
1:54
TIME 1
SPEED
AVG 1
While if you press button (4), value for TRIP TIME 1
will be reset and the instrument panel will display
TRIP TIME 1 at "0:00".
Note
If you change the unit of measurement for an
item connected to Speed (and distance) or
Consumption or after a Battery-Off, the trip time value
will be automatically reset.
1
Km
75
Km/h
2
Fig. 38
4
Advertisement
Table of Contents
