Setting am/pm
Press buttons (1) and (2) to select "AM" or "PM"
(flashing) and press button (4) to confirm. The "day
time" value starts flashing faster. Use buttons (1) and
(2) to change from "AM" to "PM" and vice versa. Once
you reach the value to be set, press button (4) to
confirm and the set "day time" value will stop flashing.
Note
Every time the battery is disconnected, the
clock is reset and must be set again by the user.
138
4
4
1
4
2
1
2
2
1
Fig. 71
4