Ducati Panigale 959 Corse 2018 Owner's Manual page 154

Setting the units of measurement: Temperature
This function allows you to change the units of
measurement of the temperature.
To gain access to this function enter the SETTING
MENU, use buttons (1) and (2) to select UNT and
press button (4).
Select TEMP option, by pressing button (1) or (2).
Once TEMP . function (B) is highlighted, press
CONFIRM MENU button (4).
When you enter the function, the current unit of
measurement is displayed flashing, followed by the
list of the possible units steady ON: °C, °F .
Press buttons (1) and (2) to highlight the units of
measurement one by one: in particular, use button (1)
to highlight the following item and button (2) to
highlight the previous item. Select the required unit of
measurement and then press the CONFIRM MENU
button (4) to confirm: the selected unit is stored in the
instrument panel, the unit of measurement indication
becomes steady and the "EXIT" option is highlighted.
The selected unit of measurement will be used by the
instrument panel for the following indications:
- Engine coolant temperature and ambient air
temperature.
1
4
2
4
2
1
4
Fig. 79
153