Table of Contents
Advertisement
Customizing the Riding Mode: setting the
EBC level
This function disables or sets the rear wheel
antilocking system (EBC) level for every single riding
mode.
Enter the SETTING MENU.
Select the R.M. option, by pressing button (1) or (2).
Once function is highlighted, press CONFIRM MENU
button (4).
You open the R.M. Menu (Riding mode).
Select the desired riding mode (RACE, SPORT or
WET), by pressing button (1) or (2).
After selecting the desired riding mode (arrow beside
the flashing riding mode), press the MENU
CONFIRMATION button (4).
You open the selected riding mode customisation
Menu. Select the parameter to be customised (EBC),
by pressing button (1) or (2). Once the desired
parameter is highlighted, press CONFIRM MENU
button (4).
When entering the function, the currently set EBC
level or status starts flashing.
Use buttons (1) and (2) to select the new desired
intervention level (1, 2 or 3) or the symbol " − " (that
identifies the "OFF" status) and press button (4) to
106
confirm. The value will become automatically steady
and the message "EXIT" will be highlighted.
To exit the menu and go back to previous page, select
"EXIT" and press button (4). The instrument panel will
go back to the previous level and will automatically
highlight the message "MEMORY".
Note
To save the new EBC parameter setting follow
the procedure "Storing Riding Mode settings"
described in paragraph "Storing Riding Mode
settings". If the user quits the Riding Mode
customisation menu without performing the storing
procedure, the just-selected settings will be lost.
Advertisement
Table of Contents
