Table of Contents
Advertisement
Customizing the Riding Mode: engine
adjustment
This function customises engine power associated
with each riding mode.
Enter the SETTING MENU. Select the R.M. (Riding
Mode) option by pressing button (1) or (2).
Once function is highlighted, press CONFIRM MENU
button (4). You open the R.M. Menu (Riding mode).
Select the desired riding mode (RACE, SPORT or
WET), by pressing button (1) or (2). After selecting the
desired riding mode (arrow beside the flashing riding
mode), press the MENU CONFIRMATION button (4).
You open the selected riding mode customisation
Menu.
Select the parameter to be customised (ENGINE), by
pressing button (1) or (2). Once the desired parameter
is highlighted, press CONFIRM MENU button (4).
When entering the function, the currently set engine
power (HIGH, MED or LOW) starts flashing. Use
buttons (1) and (2) to select the new desired engine
power and press button (4) to confirm. The value will
become automatically steady and the message "EXIT"
will be highlighted.
To exit the menu and go back to previous page, select
"EXIT" and press button (4). The instrument panel will
114
go back to the previous level and will automatically
highlight the message "MEMORY".
Note
To save the new ENGINE parameter setting
follow the procedure "Storing Riding Mode settings"
described in paragraph "Storing Riding Mode
settings". If the user quits the Riding Mode
customisation menu without performing the storing
procedure, the just-selected settings will be lost.
Advertisement
Table of Contents
