Ducati Panigale 959 Corse 2018 Owner's Manual page 190

By turning adjuster screws (1, Fig. 110) and
(2, Fig. 110) you will hear some clicks; each click
corresponds to a damping setting.
The stiffest damping setting is obtained with the
adjusters (1, Fig. 110) and (2, Fig. 110) turned fully
clockwise to the "0" position. By turning counter
clockwise starting from this position, count the clicks
that will correspond to positions "1", "2" etc.
To adjust preload, fully loosen 17 mm (0.67 in)
hexagonal adjusters (3 and 4), then set preload
considering that each turn corresponds to a 1 mm
3 4
(0.04 in) preload.
Fig. 111
STANDARD settings are as follows:
compression: 24 clicks (from fully closed position);
rebound: 21 clicks (from fully closed position);
spring preload: 4 turns (from fully open).
189