Light Control - Ducati Panigale 959 Corse 2018 Owner's Manual

Light control

1
Low / High beam
This function allows you to reduce current
consumption from the battery, by managing headlight
switching-on and off.
At Key-ON, the high beam and low beam lights are
OFF , only the parking lights are turned on.
B
Once the engine is started, the low beam is turned
on; with engine running the standard operation of the
A
lights is restored: it is possible to switch on and OFF
the high beam using button (1) in position (A), or
FLASH using button (1) in position (B). If the engine is
1
not started after Key-ON, it is still possible to turn on
the low/high beam by pressing button (1) in position
(A) on the left switch; press it once to turn on the low
beam; any further time you press it you switch
between low and high beam.
3
If engine is not started within 60 seconds since the
button was first pressed, the low and high beam
lights are turned OFF .
If the low beam or high beam was turned on before
starting the engine (with the procedure described
above), the headlight turns off automatically when
starting the engine and will turn ON again when the
5
engine has been completely started.
Fig. 82
157