Table of Contents
Advertisement
Customizing the Riding Mode: DSQ
enabling/disabling
This function disables or enables the DQS for the
selected riding mode.
Enter the SETTING MENU. Select the R.M. (Riding
mode) option by pressing button (1) or (2).
Once function is highlighted, press CONFIRM MENU
button (4).
You open the R.M. Menu (Riding mode). Select the
desired riding mode (RACE, SPORT or WET), by
pressing button (1) or (2).
After selecting the desired riding mode (arrow beside
the flashing riding mode), press the MENU
CONFIRMATION button (4).
You open the selected riding mode customisation
Menu. Select the parameter to be customised (DQS),
by pressing button (1) or (2).
Once the desired parameter is highlighted, press
CONFIRM MENU button (4).
When entering the function, the currently set DQS
status starts flashing.
The DQS can be ON or OFF .
Use buttons (1) and (2) to select the new desired
status and press button (4) to confirm. The value will
110
become automatically steady and the message "EXIT"
will be highlighted.
To exit the menu and go back to previous page, select
"EXIT" and press button (4). The instrument panel will
go back to the previous level and will automatically
highlight the message "MEMORY".
Note
To save the new DQS parameter setting follow
the procedure "Storing Riding Mode settings"
described in paragraph "Storing Riding Mode
settings". If the user quits the Riding Mode
customisation menu without performing the storing
procedure, the just-selected settings will be lost.
Advertisement
Table of Contents
