Reference Manual
00809-0100-4811, Rev AB
July 2003
Using the Setup
Function
Figure 4-11. RCT workspace
Basic
Setup
Figure 4-12. Setup Info
To install a 3300 transmitter by using the Setup function do the following:
NOTE
When working with the Setup window keep in mind that for all tabs except the
Info tab, data is updated by clicking the Receive button. To download data to
the transmitter click the Send button.
Rosemount 3300 Series
1. Start the RCT software.
2. In the RCT workspace click the
Setup icon (make sure that the
Basic area is open),
or
choose the View>Setup menu
option.
3. Choose the appropriate tab:
Info: information about the device.
Basics: Set Probe Type and
measurement units.
Analog: Variable assignment and
range value settings.
Tank Config: Tank height and other
geometry settings, dielectric
constants for vapor and upper
product.
Volume: specification of tank
geometry for volume calculations.
LCD: display panel settings.
4-17