Rosemount 3300 Series
Using the Setup Wizard
Figure 4-9. RCT workspace
Basic
Wizard
Figure 4-10. RCT Wizard
4-16
To install a 3300 transmitter by using the installation Wizard do the following:
Reference Manual
00809-0100-4811, Rev AB
1. Start the RCT software.
2. In the RCT workspace click the
Wizard icon (make sure that the
Basic section is open),
or
choose the View>Wizard menu
option.
3. Click the Start button and follow the
instructions. Now you will be guided
through a number of dialogs
allowing you to configure the
transmitter.
July 2003