Emerson Rosemount 3300 Series Reference Manual page 50

Rosemount 3300 Series
Figure 4-4. Standard tank
shapes
4-6
Standard Tank Shapes
Diameter
Diameter
Height
Diameter
Diameter
Height
Diameter
00809-0100-4811, Rev AB
Vertical Cylinder
Vertical Cylinder tanks are specified by
Diameter and Height.
Height
Horizontal Cylinder
Horizontal Cylinders are specified by
Diameter and Height.
Vertical Bullet
Vertical Bullet tanks are specified by
Diameter and Height. The volume
calculation model for this tank type
assumes that the radius of the bullet
Height
end is equal to the Diameter/2.
Horizontal Bullet
Horizontal Bullets are specified by
Diameter and Height. The volume
calculation model for this tank type
assumes that the radius of the bullet
end is equal to the Diameter/2.
Sphere
Spherical tanks are specified by
Diameter.
Reference Manual
July 2003