Rosemount 3300 Series
Setup - Info
Figure 4-13. Setup Title tab
Setup - Basics
Figure 4-14. Setup Basic tab
4-18
The Title tab shows information about the connected transmitter.
Device Name: designation of the current transmitter model.
EPROM ID:current transmitter database version.
Device Type: designates the transmitter type. 33 is used for the 3300 Series.
Device ID: a unique identifier for each 3300 Series transmitter.
Hardware Rev: the current revision of the transmitter electronic board.
Software Rev:the current revision of the transmitter software that controls
measurement, communication, internal checks etc.
The Basics tab lets you choose Measurement Units for Level, Volume and
Temperature. These units are used wherever measurement and configuration
data is presented.
This window also allows you to enter some general information about the
transmitter like Message, Tag, Descriptor and Date. This information is not
required for the operation of the transmitter and can be left out if desired.
Reference Manual
00809-0100-4811, Rev AB
July 2003