Configuring Encryption Settings - Dell PowerVault TL1000 User Manual

Once the network settings are entered on the Operator Panel, the current date and time can be modified
with the Web User Interface.
The TL1000 Tape Autoloader communicates with an NTP server with the following conditions:
v Client/server basis operation
v UDP (User Datagram Protocol) to access the NTP server
v Does not use authentication keys
v Library polling is every 12 hours
To modify the date and time settings:
1. Expand Configure Library, if necessary, and click Date and Time in the left navigation pane of the
Web User Interface.
2. Select the Date and Time settings.
v NTP Server - Enables time and date control with a time server on the network.
– NTP server address - Enter the IP address of the time server. IPv4 and IPv6 addresses are
supported, depending on the TCP/IP settings. Host names can be entered instead of numerical
IP addresses if Use DNS is selected in the Network settings.
– Time zone - Enter the time zone relative to Greenwich Mean Time (GMT).
v If the time server is disabled, enter the local time and date manually.
– Date - Enter the date with the MM/DD/YYYY format.
– Time - Enter the time with the HH:MM:SS format.
v Auto Adjustment by PC - Select a time interval and click Start to synchronize the library with the
clock on your host computer at regular intervals. The Web User Interface Java Applet must be
running continuously to use this function.
3. Click Submit to update the settings.

Configuring encryption settings

Two types of encryption can be configured for your library. The default is None. The two types are
v Application Managed Encryption - For encryption in operating environments that run an application
capable of generating and managing encryption policies and keys.
v Library Managed Encryption - For encryption by the TL1000 Tape Autoloader tape drive.
If you did not purchase the feature for Library Managed encryption, you can configure your library for
Application Managed encryption. If you select application-managed encryption, no further configuration
steps are necessary. Click Submit to enable the setting.
Installation and configuration
37