Reseating Cables - Dell PowerVault TL1000 User Manual

Table 21. Front Panel LED indicators (continued)
Library Ready/Activity
Condition
I/O Station Flashes 2 times
unlocked every 3 seconds
Library firmware Flashes 2 times
is being updated every 3 seconds
Drive firmware is Flashes 2 times
being updated every 3 seconds
Drive dump is Flashes 2 times
being uploaded to every 3 seconds
host computer
Library is offline Flashes 2 times
every 3 seconds
Cartridge is being Flashes 2 times
moved every 3 seconds
Library error
occurred
Drive error
occurred
Cartridge error
occurred
Cleaning
cartridge expired
Drive requested
cleaning
Drive is being
cleaned
Library is online
and ready to
receive a
command

Reseating cables

To reseat external library cables, complete the following steps:
1. Locate the following cables on the rear panel of the library.
a. SAS attachment for the drive
b. Ethernet cable for connection to a network
c. Power supply cable
2. Check and reseat, if necessary, all of the cables that are connected to your library.
3. Verify that there is no damage to any connector pins.
108
Dell PowerVault TL1000 Tape Autoloader: User's Guide
Cleaning LED
LED
OFF
OFF
OFF
OFF
OFF
OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON ON
ON Flashes 1 time per
second
ON OFF
Attention LED Error LED
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF ON
OFF ON
ON OFF
ON OFF
OFF OFF
OFF OFF
OFF OFF
Message on
Display
N/A
LOADER
FIRMWARE
UPDATING!
DRIVE
FIRMWARE
UPDATING!
DRIVE DUMP
DATA
UPLOADING!
OFFLINE
READY
*** CHK ***
CODE: [XXXX]
DRIVE FAULT
CODE: [X]
MEDIA FAULT
CODE: [X]
REPLACE
CLEANING
MEDIA
CLEAN DRIVE
CLEANING...
READY