Table of Contents
Advertisement
Web User Interface
The Web User Interface Java Applet requires Java 1.5.0 or higher be installed on your host computer for
full function, and is best viewed with Internet Explorer 6.0 or higher. Internet Explorer 7.0 or higher is
required for IPv6. If your computer does not have Java installed or you must upgrade your installation,
download the latest version of the Java Runtime Environment (JRE) for your platform from
http://www.java.com/. Follow the instructions that are provided to enable and configure the Java
Runtime Environment for your browser.
The Web User Interface can also be used to update the library and drive firmware, and to download
error logs, drive memory dumps, and other library data.
Before the TL1000 Tape Autoloader can be managed over a network with the Web User Interface, set up
the initial network configuration of the library with the Operator Panel. For information, see
"Configuring network settings" on page 46.
Logging in
To log in to the Web User Interface from Internet Explorer, you must enter the IP address of the library.
The IP address can be obtained with the View Settings command from the Operator Panel. For example,
http://192.168.1.1.
When the applet starts, the following warning message displays. This message is normal and does not
indicate a problem.
Figure 13. Java security warning message
After the Web User Interface is started, the login window is displayed.
17
User interfaces
Advertisement
Table of Contents
