Table of Contents
Advertisement
Configuring your library with the Web User Interface
If you choose to use the Web User Interface to configure your library, first enter your library network
settings with the Operator Panel (see "Configuring network settings" on page 61).
To configure your library with the Web User Interface:
1. Install Java 1.5.0 or higher on your host computer. Download the latest version of the Java Runtime
Environment (JRE) for your platform from http://www.java.com/.
2. "Logging in to the Web User Interface"
3. "Checking firmware level" on page 33
4. "Configuring library settings" on page 34
5. "Configuring network settings" on page 35
6. "Configuring date and time settings" on page 36
7. "Configuring encryption settings" on page 37
8. "Configuring email notifications" on page 40
9. "Configuring trap notifications" on page 41
10. "Managing user access" on page 43
11. "Saving the library configuration" on page 45
Logging in to the Web User Interface
To log in to the Web User Interface:
1. If necessary, obtain the IP address of the library on the Operator Panel.
a. From the top menu of the Operator Panel, press the Minus key to select View Current
Information, and press Enter.
b. Press the Minus key until the IP Address setting is displayed and make a note of the IP address.
c. Press the Cancel key repeatedly to log out of the Operator Panel.
2. Open Internet Explorer on your server or PC to access the Web User Interface.
3. In the browser address field, enter your library's IP address URL to start the Web User Interface
applet in the browser window. For example, http://192.168.1.1
When the applet launches, the warning message in Figure 28 displays. This message is normal and
does not indicate a problem.
4. Click Run.
Figure 28. Java security warning message
Installation and configuration
31
Advertisement
Table of Contents
