System Board Power Led; System Board Fault Led; Monitor Led; Lower Ethernet Link Led - IBM 2145UPS-1U Hardware Installation Manual

|

System board power LED

System board fault LED

Monitor LED

Lower Ethernet link LED

Upper Ethernet link LED

106
IBM System Storage SAN Volume Controller: Hardware Installation Guide
3
2
1
1
System board power LED
2
System board fault LED
3
Monitor LED (not used)
4
Lower Ethernet link LED
5
Upper Ethernet link LED
The system board power LED indicates the power supply status that is detected by
the system board.
The amber system board fault LED indicates that the system board has detected a
critical failure.
You can view the system board fault LED in the documentation on the rear panel
indicators.
The green monitor LED is not used on the SAN Volume Controller.
You can view the monitor LED in the documentation concerning the rear panel
indicators.
The lower Ethernet link LED indicates the operational status of Ethernet port 1.
This LED is illuminated when a good Ethernet connection exists between the SAN
Volume Controller 2145-4F2 and the Ethernet network.
The upper Ethernet link LED indicates the operational status of Ethernet port 2.
This LED is illuminated when a good Ethernet connection exists between the SAN
Volume Controller 2145-4F2 and the Ethernet network.
Ethernet port 2 is not used on the SAN Volume Controller.
4
5