Appendix A. San Volume Controller 2145-8F4 And San Volume Controller 2145-8F2; Preparing Your San Volume Controller 2145-8F4 Or San Volume Controller 2145-8F2 Environment - IBM 2145UPS-1U Hardware Installation Manual

Appendix A. SAN Volume Controller 2145-8F4 and SAN
Volume Controller 2145-8F2
The SAN Volume Controller 2145-8F4 and SAN Volume Controller 2145-8F2 nodes
have some unique features, controls and indicators, rear panel indicators, hardware
components, and connectors.
Features of a SAN Volume Controller 2145-8F4 node
The SAN Volume Controller 2145-8F4 node has the following features:
v 19-inch rack-mounted enclosure
v One 4-port 4 Gbps fibre-channel adapter (four fibre-channel ports)
v 8 GB cache memory
Features of a SAN Volume Controller 2145-8F2 node
The SAN Volume Controller 2145-8F2 node has the following features:
v 19-inch rack-mounted enclosure
v Two 2 Gbps 2-port fibre-channel adapters (four fibre-channel ports)
v 8 GB cache memory
Preparing your SAN Volume Controller 2145-8F4 or SAN Volume
Controller 2145-8F2 environment
Before installing the SAN Volume Controller 2145-8F4 or SAN Volume Controller
2145-8F2, you must prepare the physical environment.
Input-voltage requirements
Ensure that the following requirements for each SAN Volume Controller 2145-8F4
or SAN Volume Controller 2145-8F2 node are met:
Power requirements for each node
Ensure that the following power is available for each SAN Volume Controller
2145-8F4 or SAN Volume Controller 2145-8F2 node. The power that is required
depends on the node type, the uninterruptible power supply (UPS) type, and
whether the redundant ac power feature is used.
© Copyright IBM Corp. 2003, 2007
Voltage
200 to 240 V single phase ac
Components
SAN Volume Controller 2145-8F4 + 2145
UPS-1U
SAN Volume Controller 2145-8F2 + 2145
UPS-1U
SAN Volume Controller 2145-4F2 + 2145
UPS-1U
Frequency
50 or 60 Hz
Power requirements
520 W
520 W
420 W
65