Advertisement
Table of Contents
IBM 9910 Uninterruptible Power Systems safeguard
your equipment and data from power problems
Table of contents
1
Overview
1
Key prerequisites
2
Planned availability date
2
Description
2
Product number
At a glance
The IBM® 9910 Uninterruptible Power Systems
•
Models that are tested and approved by IBM
•
An extended Eaton-Powerware warranty supported by IBM
•
A premium service package (including battery)
•
Enhanced conditioning of utility power and battery backup
Overview
All IBM 9910 Uninterruptible Power Systems have passed IBM's testing procedures
and are intended to provide a convenient, single source for protection of IBM
servers. These new 9910 products are compatible with the power requirements of:
•
IBM Power Systems, POWER6
•
IBM System i5® and p5 servers
•
IBM eServer
TM
•
IBM TotalStorage® solutions
All 9910 Uninterruptible Power Systems include a premium Eaton-Powerware Five-
Year Gold Plan warranty package that is designed to enhance the potential for a
return on investment as compared to other power supplies available on the market
today. In addition, the warranty:
•
Extends coverage of the device (refer to the specific product warranty period)
•
Provides remote problem determination and next-day exchange (if available) by
the device manufacturer (when necessary)
•
Offers a single point of contact through the IBM Call Center
For a complete description of each device, refer to the
announcement.
Key prerequisites
The key prerequisites consist of the operating system and the selected applications
that are required for your business.
IBM Asia Pacific Hardware Announcement AG11-0027
IBM Asia Pacific Hardware Announcement
AG11-0027, dated April 12, 2011
and POWER7
TM
iSeries®, pSeries®, and OpenPower® servers
IBM is a registered trademark of International Business Machines Corporation
3
Publications
3
Technical information
9
Pricing
9
AP distribution
offer you:
TM
TM
Description
section of this
1
Advertisement
Table of Contents
Related Manuals for IBM 9910-E36
Summary of Contents for IBM 9910-E36
- Page 1 Enhanced conditioning of utility power and battery backup Overview All IBM 9910 Uninterruptible Power Systems have passed IBM's testing procedures and are intended to provide a convenient, single source for protection of IBM servers. These new 9910 products are compatible with the power requirements of: •...
-
Page 2: Planned Availability Date
Description With today's announcement, IBM offers the following Eaton-Powerware devices: IBM 9910 Model E36 (Powerware 9910) is a 3000 VA, 230 to 240 V ac, single-phase Uninterruptible Power System that helps protect equipment up to 2700 watts. This line interactive device features load segments for scheduled shutdowns, extended run times, and a 3U design to be rack-mounted. -
Page 3: Technical Information
IBM is your one-stop shop for IT support needs. For details on available services, contact your IBM representative or visit http://www.ibm.com/services/ For details on available IBM Business Continuity and Recovery Services, contact your IBM representative or visit http://www.ibm.com/services/continuity For details on education offerings related to specific products, visit http://www.ibm.com/services/learning/index.html... -
Page 4: Operating Environment
If the relay-serial card (feature number 2944) is used, no software is required. IBM has a platform managed solution that allows the relay card signals from the UPS to be broadcast to IBM i, AIX, and Linux partitions. Each partition has a default shutdown time. -
Page 5: Terms And Conditions
9910-E35. The 2976 is available for ordering with the 9910-E36. The E35 and E36 have two C20 outlets that can be used to support two Rack PDU via feature numbers 9910-2974. The E35 has two IEC-C13 outlets and two NEMA L6-20 outlets that will support power cords from units in a rack directly to the E35. - Page 6 Maintenance service options CRU and On-site Service At IBM's discretion you will receive CRU service or IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well lit, and suitable for the purpose.
-
Page 7: On-Site Service
On-site Service IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well lit, and suitable for the purpose. - Page 8 If IBM has a Technical Service Agreement with the manufacturer of the failing part, or if the failing part is an accommodations part (a part with an IBM FRU label), IBM may also source and replace the failing part at no additional charge. For all other non-IBM parts, customers are responsible for sourcing the parts.
- Page 9 IBM products and services which are announced and available in your country can be ordered under the applicable standard agreements, terms, conditions, and prices in effect at the time. IBM reserves the right to modify or withdraw this announcement at any time without notice. This announcement is provided for your information only.
Need help?
Do you have a question about the 9910-E36 and is the answer not in the manual?
Questions and answers