San Volume Controller 2145-4F2 Connectors; Using The 2145 Ups - IBM 2145UPS-1U Hardware Installation Manual

SAN Volume Controller 2145-4F2 connectors

The external connectors for the SAN Volume Controller can be located easily.
Context
Figure 73 provides the locations of the external connectors.
Figure 73. SAN Volume Controller 2145-4F2 connector locations
The following figure shows an illustration of the type of connector located on the
power supply assembly. The connector allows you to connect the SAN Volume
Controller 2145-4F2 to the power source from the uninterruptible power supply.

Using the 2145 UPS

The 2145 uninterruptible power supply (2145 UPS) provides a SAN Volume
Controller 2145-4F2 node with a secondary power source if you lose power from
your primary power source due to power failures, power sags, power surges, or
line noise.
1
8 7
1
Power connector
2
fibre-channel port 3
3
fibre-channel port 4
4
Ethernet port 2 (not used on the SAN Volume Controller 2145-4F2)
5
Ethernet port 1
6
Serial connector
7
fibre-channel port 2
8
fibre-channel port 1
Neutral
Ground
Live
2 3 4
6 5
Appendix B. SAN Volume Controller 2145-4F2
107