Management; Network Connection; Web Browser Management - ORiNG IAP-W42X User Manual

IAP-W420/W422 UserManual
M
anagement

5.1 Network Connection

Before installing the device, you need to be able to access the devicevia a computer
equipped with an Ethernet card or wireless LAN interface. To simplify the connection, it is
recommended to use an Ethernet card to connect to a LAN.
Follow the steps below to install and connect the deviceto PCs:
Connect a computer to the device.Use either a straight-through Ethernet cable or cross-over
cable to connect the LAN port of thedeviceto a computer. Once the LED of the LAN port
lights up, which indicates the connection is established, the computer will initiate a DHCP
request to retrieve an IP address from the AP.

5.2 Web Browser Management

An embedded HTML web site resides in the flash memory of the device. It contains
advanced management features which you can managefrom anywhere on the network
through a standard web browser such as Microsoft Internet Explorer (Internet Explorer 5.0 or
later versions). It is based on Java Applets which can reduce network bandwidth
consumption, enhance access speed, and provideuser-friendly viewing windows.
Note: By default, IE5.0 or later version does not allow Java Applets to open sockets. You
need to explicitly modify browser settings in order to enable Java Applets to use network
ports.
Open a web browser on your computer and type http://192.168.10.2(default gateway IP of the
ORingIndustrial Networking Corp
13