Management Interface; First-Time Installation - ORiNG IGR-20 Series User Manual

M
anagement Interface
5.1

First-time Installation

Before installing IGR-20, you need to access router by a computer equipped with an
Ethernet card.
Step 1: Select the Power Source
IGR-20 router can be powered by +12~48V DC power input, or by P.O.E. (Power over
Ethernet) PSE Ethernet switch.
Step 2: Connect a computer to IGR-20
Use either a straight-through Ethernet cable or cross-over cable to connect to ETH1 of
IGR-20 AP router to a computer. If the LED of the LAN port lights up, it indicates the
connection is established. After that, the computer will initiate a DHCP request to get an
IP address from the router.
Step 3: Use the web-based manager to configure IGR-20
The default gateway IP of IGR-20 router is 192.168.10.1. Start the web browser of
your computer and type
login window will popup, and then enter the default login name admin and password
admin.
ORing Industrial Networking Corp.
Basic connection for IGR-20
http://192.168.10.1 in the address box to access the webpage. A
IGR-20 Series User's Manual
7