Management Interface; First-Time Installation - ORiNG IAR-320 series User Manual

M
anagement Interface
5.1

First-time Installation

Before installing IAR-320 / 320+ WLAN AP router, you need to access the WLAN AP
router by a computer equipped with an Ethernet card or wireless LAN interface. Using an
Ethernet card to connect to LAN port is easier and recommended.
Step 1: Select the Power Source
IAR-320 / 320+ AP router can be powered by +12~48V DC power input, or by P.O.E.
(Power over Ethernet) PSE Ethernet switch.
Step 2: Connect a computer to IAR-320 / 320+
Use either a straight-through Ethernet cable or cross-over cable to connect to ETH1 of
IAR-320 / 320+ AP router to a computer. If the LED of the LAN port lights up, it indicates
the connection is established. After that, the computer will initiate a DHCP request to get
an IP address from the AP router.
Step 3: Use the web-based manager to configure IAR-320 / 320+
The default gateway IP of IAR-320 / 320+ AP router is 192.168.10.1. Start the web
browser of your computer and type
webpage. A login window will popup, and then enter the default login name admin and
password admin.
ORing Industrial Networking Corp.
Basic connection for IAR-320 / 320+
http://192.168.10.1
IAR-320 / 320+ User's Manual
in the address box to access the
12