Management; Network Connection; Open-Vision Configuration - ORiNG TGAP-620-M12 Series User Manual

TGAP-620-/6620-M12 Series User Manual
M
anagement

5.1 Network Connection

Before installing the device, you need to be able to access the device via a computer
equipped with an Ethernet card or wireless LAN interface. To simplify the connection, it is
recommended to use an Ethernet card to connect to a LAN.
Follow the steps below to install and connect the device to PCs:
Connect a computer to the device. Use either a straight-through Ethernet cable or cross-over
cable to connect the LAN port of the device to a computer. Once the LED of the LAN port
lights up, which indicates the connection is established, the computer will initiate a DHCP
request to retrieve an IP address from the AP.

5.2 Open-Vision Configuration

The device can be configured using ORing's proprietary Windows utility Open-Vision. Follow
the steps below to set up the device in Open-Vision.
Step 1: Open the commander and click Discover, a list of AP devices will be shown.
Step 2: Choose your access point. The functions of the AP will be shown in a tree structure.
Step 3: Type in the username and password to log in to setup the AP.
ORing Industrial Networking Corp 13