Installing The Device In The Rack - Brocade Communications Systems G610 Hardware Installation Manual

Installing the device in the rack

Complete the following steps to install the device in the rack.
1. Position the device in the rack, as shown in the following figure, providing temporary support under the device until the rail kit is
secured to the rack.
2. Attach the right front bracket to the right front rack post using two 10-32 x 5/8-in. screws and two retainer nuts.
3. Attach the left front bracket to the left front rack post using two 10-32 x 5/8-in. screws and two retainer nuts.
Brocade G610 Hardware Installation Guide
53-1004408-08
Installing the 1U and 2U Fixed-Mount Rack Kit for Four-Post Racks (XBR-R000162)
31