Leds; Weight And Physical Dimensions; Environmental Requirements - Brocade Communications Systems G610 Hardware Installation Manual

LEDs

System component
Ethernet management port
USB port
LEDs
System component
System power LED
System status LED
Ethernet port link LED
Ethernet port activity LED
FC port status LED
NOTE
All the LEDs are on the port-side view of the device.

Weight and physical dimensions

Empty weight refers to the device with built-in power supply and fan assemblies but no SFP+ or QSFP transceivers.
Height
4.29 cm
1.69 inches

Environmental requirements

Condition
Ambient temperature
Relative humidity (non-
condensing)
Altitude (above sea level)
Shock
Vibration
Airflow
Heat dissipation
Operating noise
80
Description
One 1000/100/10 Mbps Ethernet port
One external USB port
Description
One green system power status LED (upper) on the left side.
One bicolor (green/amber) system status LED (lower) on the left side.
One link LED on the left of the RJ45 connector. This glows green for 1000 Mbps and amber for 100/10 Mbps.
One green activity LED on the right of the RJ45 connector.
24 bicolor (green/amber) port status LEDs. There is one LED for each SFP+ port on the switch.
Width
42.88 cm
16.88 inches
Operational
0°C to 40°C (32°F to 104°F)
10% to 85% at 40°C (104°F)
0 to 3000 m (9,842 feet)
20.0 G, 6 ms, half-sine wave
0.5 G sine, 0.4 gms random, 5 – 500 Hz
Maximum: 54.5 cmh (32.1 cfm)
Nominal: 36.35 cmh (21.4 cfm)
Refer to the Power consumption sections.
Maximum: 64 dBA
Normal: 57 dBA
Depth
30.64 cm
12.06 inches
Weight (empty)
4.2 kg
9.30 lb
Non-operational
-25°C to 70°C (-13°F to 158°F)
10% to 90% (Non-condensing)
0 to 12000 m (39,370 feet)
33.0 G, 11 ms, half-sine wave, 3G Axis
2.0 G sine, 1.1 gms random, 5 – 500 Hz
N/A
N/A
N/A
Brocade G610 Hardware Installation Guide
Weight (fully loaded)
5.75 kg
12.65 lb
53-1004408-08