Attaching Rear Brackets To The Rack Posts - Brocade Communications Systems G610 Hardware Installation Manual

Installing the 1U and 2U Non-Port Side Fixed-Mount Rack Kit (15"-20") for Four-Post Racks (XNA-000072 and XNA-100072)
4. Repeat step 1 through step 3 to attach the left rear bracket to the left front bracket.
FIGURE 34 Attaching the rear brackets to the front brackets
1. Bracket, front left
2. Bracket, rear left

Attaching rear brackets to the rack posts

Complete the following steps to attach the rear brackets to the rack posts.
1. Attach the right rear bracket to the right rear rack post using two 10-32 x 5/8-in. screws and two retainer nuts as shown in the
following figure. Select the correct retainer nuts for either square or round holes in the rack posts.
56
3. Screws, 6-32 x 1/4 in., panhead Phillips (4 per side)
Brocade G610 Hardware Installation Guide
53-1004408-08