Brocade Communications Systems G610 Hardware Installation Manual page 48

Slide Rack Mount Kit (XBR-R000070)
4. Gently slide the device into the rack. If there is any resistance, pull the device out of the rack and realign the slide rails.
NOTE
Check the rail alignment by sliding the device out and back into the rack.
FIGURE 26 Inserting the device
1. device
2. Slide assembly closed end
3. Outer slide rail
48
4. Slide assembly open end
5. Inner slide rail
6. Lock-release lever
Brocade G610 Hardware Installation Guide
53-1004408-08