Brocade Communications Systems G610 Hardware Installation Manual page 49

5. Secure the rack mount brackets to the rack posts using one Phillips 10-32 x 1/2 in. screw per bracket and tighten the screws to
a torque of 25 in-lbs (29 cm-kgs).
For square-hole rack post Method A installations, use the remaining retainer nut to secure the screw.
Refer to Figure 27
post.
FIGURE 27 Securing rack mount brackets for round-hole rack posts
1. Right rack mount bracket
2. Rack post
FIGURE 28 Method A for securing rack mount brackets for square-hole rack posts
Brocade G610 Hardware Installation Guide
53-1004408-08
for a round-hole rack post; refer to Figure 28 (Method A) or Figure 29
3. Three-hole rack nut bar, 8-32
4. Phillips screw, 10-32 x 1/2 in., black
Slide Rack Mount Kit (XBR-R000070)
(Method B) for a square-hole rack
49