Parts list
The following parts are provided with the 1U, 1.5U, or 2U Mid-Mount Rack Kit for Two-Post Racks (XBR-000165, XBR-000175, and
XBR-R000292).
NOTE
Depending on the device type, not all parts may be used in an installation.
FIGURE 3 Rack kit parts
1.
Bracket, front right and back left
2.
Bracket, front left and back right
3.
Screw, 8-32 x 5/16-in., panhead Phillips (12)
Attaching the front brackets to the device
CAUTION
The device must be turned off and disconnected from the fabric during this procedure.
Brocade G610 Hardware Installation Guide
53-1004408-08
Installing the 1U, 1.5U, and 2U Mid-Mount Kit for Two-Post Racks (XBR-000165, XBR-000175, and XBR-R000292)
4.
Screw, 6-32 x 1/4-in., flathead Phillips (8)
5.
Screw, 10-32 x 5/8-in., panhead Phillips (8)
6.
Retainer nut, 10-32 (8)
23