Brocade Communications Systems G610 Hardware Installation Manual page 29

FIGURE 8 Rack kit parts
1. Bracket, front right
2. Bracket, front left
3. Bracket, rear left
4. Bracket, rear right
NOTE
Not all parts may be used with certain installations depending on the device type.
NOTE
Although this document describes how to install single-height (1U) and double-height (2U) devices, the illustrations show a
single-height device as a typical installation.
Brocade G610 Hardware Installation Guide
53-1004408-08
Installing the 1U and 2U Fixed-Mount Rack Kit for Four-Post Racks (XBR-R000162)
5. Screw, 8-32 x 5/16-in., panhead Phillips (12)
6. Screw, 6-32 x 1/4-in., flathead Phillips (8)
7. Screw, 10-32 x 5/8-in., panhead Phillips (8)
8. Retainer nut, 10-32 (8)
29