Step 2: Measuring Throughput - JDS Uniphase HST-3000 User Manual

Chapter 2 ADSL2 Testing
Testing Data services
Setting
Delay
Upload Rate
Upload Loss
Upload Jitter
Download Rate
Download Loss
Download Jitter
Step 2: measuring
throughput
48
5 Press the QOS THLD soft key, and then specify the
threshold settings.
Description
Specify the maximum allowed delay to the server, in millisec-
onds.
Specify the threshold for the upload rate to the server when
running a TCP upload test.
Specify the threshold for the loss ratio for a UDP upload test to
the server.
Specify the threshold for the jitter for a UDP upload test to the
server.
Specify the threshold for the download rate from the server
when running a TCP download test.
Specify the threshold for the loss ratio for a UDP download
test from the server.
Specify the threshold for the jitter for a UDP download test
from the server.
You have specified the settings.
After specifying settings and connecting to the circuit, use the
JDSU QoS results to measure throughput.
To measure throughput
1 If you haven't already done so, connect the HST-3000 to
the circuit under test.
2 Press the Display soft key and then select JDSU QoS
Results.
HST-3000 ADSL2 Testing User's Guide