Updating The Modem Software - JDS Uniphase HST-3000 User Manual

Updating the
The TI and Infineon SIMs allow you to upgrade the firmware
for the modem and data pump. You may get a pop-up menu
modem
when launching ADSL Modem mode asking you to update the
software
firmware.
To update the modem driver
1 Locate the correct modem driver.
2 Press the Display soft key, and then select Identity.
3 Press the Actions soft key, and then select the location of
4 If you selected FTP or Updater, specify the following
HST-3000 ADSL2 Testing User's Guide
It may be on a USB stick (top-most directory), on a FTP
site, or something similar.
the new files.
If the files are...
on a USB stick
on a FTP site
in the HST Updater pro-
gram or on a TFTP server
If you selected USB, the update begins.
settings:
Setting
IP Mode
IP Address
Gateway
Username
(FTP only)
select...
Update Modem Software - USB
Update Modem Software - FTP
Update Modem Software - Updater
Description
How the HST will obtain an address:
Static or DHCP
The IP address used to connect to the
server. Only valid when IP Mode is static.
The gateway that IP traffic will be routed
through when attempting to connect to the
server. This is only valid when IP Mode is
Static.
The user that will be used when connect-
ing to the FTP server.
Chapter 1 Getting Started
Quick tour
7