Measuring Throughput Using Jdsu Qos - JDS Uniphase HST-3000 User Manual

2 Press the Home navigation key.
3 Connect the HST to the line. See
4 Press the Actions soft key then select Start ATM BERT.
5 Press the Display soft key.
6 Press the 4 key then select ATM BERT.
7 To insert an error, press the Actions soft key then select
8 Press the Results soft key to clear or save the results.
You have completed the ATM BERT test.
Measuring
JDSU QoS (also called Iperf) is a method of qualifying copper
lines to verify the throughput supported for the copper wire for
throughput
voice and video traffic. This is a network testing tool that can
using JDSU
create TCP and UDP data streams and measure the
QoS
HST-3000 ADSL2 Testing User's Guide
on page 40.
After data synchronization occurs, the Actions soft key
appears.
The ATM BERT results window appears.
Inject ATM BERT Error.
The Injected Errors counter should increment.
See "ATM BERT results" on page 77
interpreting the results.
Chapter 2 ADSL2 Testing
Testing Data services
"Connecting to the line"
for information on
45