Releasing Ip Addresses - JDS Uniphase HST-3000 User Manual

3 Select a ping method:
4 Press the Results soft key to clear the results or save
The ping test is complete.
Releasing IP
The HST allows you to release allocated IP addresses, so it
can be used by other equipment. The IP release feature is
addresses
available when the data mode is set to one of the following:
– IP over Ethernet (IPoE)
– PPP over Ethernet (PPPoE)
– PPP over ATM (PPPoA)
For instructions specifying the data mode, see
data settings" on page
The following procedure describes how to release IP
addresses.
To release IP addresses
1 Press the Home navigation key.
2 Connect the HST to the line. See
3 Press the Display soft key.
4 Press the 4 key to select IP Results.
HST-3000 ADSL2 Testing User's Guide
– Ping Once sends a single ping to the network.
– Start Ping consecutively sends multiple pings to the
network, up to the number of pings configured.
them to a text file.
For more information on saving results and managing the
files, see the HST-3000 Base Unit User's Guide.
on page 40.
The IP results window appears.
26.
"Connecting to the line"
Chapter 2 ADSL2 Testing
Testing Data services
"Specifying
43