Upgrading the device to run layer 3 software
You can upgrade a FastIron IPv4 device to run Layer 3 code. To do so, follow the instructions in
Procedures for FastIron IPv4
NOTE
The procedures in
layer 3 software image. These devices support software-based licensing. Refer to the FastIron Configuration Guide for details.
Brocade FastIron Edge X-Series Hardware Installation Guide
Part Number: 53-1002499-02
devices".
Appendix A
do not describe how to upgrade FastIron IPv6 devices (FESX624 and FESX648) to run the full
Replacing and Maintaining the Hardware
Upgrading the device to run layer 3 software
Appendix A, "Layer 3 Upgrade
71