Power Supplies - Brocade Communications Systems FESX624HF Installation Manual

Fastiron edge x-series
Table of Contents

Advertisement

Power supplies

Each FastIron compact switch comes with one alternating-current (AC) or direct-current (DC) power supply, depending on how it was
ordered from the factory. All models have two power supply slots, enabling you to install a second power supply for redundancy.
Direct-current (DC) supplies are available for some devices, in which you can use any combination of AC and DC supplies in the same
device. The following table lists the power supplies that may be installed in a FastIron compact switch.
Table 4
and
Table 5
show which Brocade power supply can be installed on each Brocade FastIron compact product.
NOTE
You can interchange power supplies, but you must adhere to the compatibility matrix shown in the tables below.
NOTE
Changes or modifications made to this device that are not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
TABLE 4
FastIron AC power supply compatibility matrix
Device
FastIron Edge Switch
FastIron Edge Switch - Power
Over Ethernet
FastIron X Series with 24 ports
FastIron X Series with 48 ports
1.
RPS5 = RPS-X424 = 220 watts
2.
RPS8 = RPS-X424-POE = RPS-X448 = RPS-FGS = 600 watts
TABLE 5
FastIron DC power supply compatibility matrix
Device
FastIron Edge Switch
FastIron Edge Switch - Power
Over Ethernet
FastIron X Series with 24 ports
FastIron X Series with 48 ports No
1.
RPS5DC = RPSDC-X424 = 220 watts
2.
RPS8DC = RPSDC-X424-POE = RPSDC-X448 = RPSDC-FGS = 600 watts
The power supplies can be swapped in or out of the device while the device is running. You can remove and insert a power supply without
opening the device. If the device contains non-POE redundant power supplies, you can remove one of the supplies without interrupting
operation. The remaining supply provides enough power for all the ports.
The following sections provide further details about the power supplies for the FastIron family of switches:
Brocade FastIron Edge X-Series Hardware Installation Guide
Part Number: 53-1002499-02
1
2
RPS5
RPS8
220 watts
600 watts
Yes
No
No
Yes
Yes
No
No
Yes
1
2
RPS5DC
RPS8DC
RPSDC-X
220 watts
600 watts
424
220 watts
Yes
No
No
No
Yes
No
No
No
Yes
Yes
No
RPS-X4
RPS-X42
RPS-X44
24
4-POE
8
220
600 watts
600 watts
watts
Yes
No
No
No
No
Yes
Yes
No
No
No
Yes
Yes
RPSDC-X
RPSDC-
424-POE
X448
600 watts
600
watts
No
No
No
Yes
No
No
Yes
Yes
RPS-FGS
600 watts
No
Yes
No
Yes
RPSDC-FGS
600 watts
No
Yes
No
Yes
Product Overview
Hardware features
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fesx624hfe-prem6Fesx624e-prem6

Table of Contents